Your browser is outdated

The internet explorer is no longer supported. Please switch browsers for better website experience.

Reliability Test

Reliability Testing ensures a product works as expected in normal and unusual situations. Electrical and electronic reliability testing is the opportunity to gauge a product’s lifespan and identify the causes of failures.

Dynamic Mechanical Test

Any products may have collision and vibration problems during delivery, use and storage, which may seriously affect the use of the products and unnecessary economic losses. To avoid happening of these situations, we have to know the mechanical properties of the products or the components of the products in advance.

DEKRA provides customers with the following dynamic testing services:

  • Vibration Test
  • Mechanical Shock Test
  • Damage Boundary Curve Test (DBC Test)
  • Bump Test
  • Drop Test
  • Compression Test
  • Earthquake Test
  • Temperature and Humidity with Vibration Test

Climate Environment Test

The climatic environment test mainly deals with the stress conditions produced by the natural climatic environment, such as temperature, humidity, sunlight radiation, rain, dust and gas, etc. Climate environment test is to investigate the adaptability of products to the environment, to determine the environmental requirements of products to use, which runs through the whole life cycle of products. It is effective to examine and expose the design and manufacturing quality problems of products through environmental tests, to improve their reliability.

DEKRA provides customers with the following climatic testing services:

  • Low TemperatureTest
  • High Temperature Test
  • Damp Heat Cycle(with frost or without frost)
  • Temperature Shock
  • Temperature Cycle
  • Solar Radiation Test+ Xenon Test +UV Test
  • IP code: IPX1, IPX2, IPX3, IPX4, IPX4K, IPX5, IPX6, IPX6K, IPX7. IPX9K
  • Dust Test: IP5X, IP5KX, IP6X, IP6KX, IP1X, IP2X, IP3X, IP4X
  • Altitude Test
  • Temperature Shock Immersion
  • Condensation Test with Assemblies
  • Harmful Gas Test
  • Salt Spray Test
  • Frost Test
  • SIR test/CAF Test
  • Insulation Resistance

Design Verification

With the rapid development of global economy, an increasing number of products must ensure a certain life and quality requirements. Are you still bothering about whether the product will last 3 years or 5 years? Are you still bothering about how to improve the defective rate of products?? The professional technical team of DEKRA shall provide you with design verification services and provide you with one-stop service to solve your problems.

DEKRA provides customers with the following services:

  • Reliability Demonstration Test (MTBF)
  • Damage Boundary Curve Test (DBC Test)
  • Highly Accelerated Life Test (HALT)
  • Highly Accelerated Stress Screen (HASS)
  • Highly Accelerated Stress Audit (HASA)

Material Verification

Each component in the vehicle composes of more than thousand kinds materials (metal, non-metallic and composite materials). According to the different applications and locations, the strength and quality of those materials have to think over very carefully and make sure the sustainable reliability in severe temperature, strength, aging and corrosive environment. Currently more people are more concerned about safety, energy saving, lightweight and comfort needs while purchasing a car, and these needs and material changes are inextricably linked.

DEKRA offers material verification completely, including

  • UV Test
  • Solar Test
  • Adhesion Test
  • Chemical Loads Test
  • Flammability Test
  • Ozone Test
  • Resistance to Solvents and etc.

Laboratory's Advantages

  • We are the only laboratory in this field can provide the one-stop solution from automotive modules, parts to IC supplier chain in product reliability analysis and ISO/TS16949 quality management system certification.
  • Received recognition by the ISO/IEC 17025 lab accreditation systems such as CNAS, and IECQ.
  • Mastering requirements such as GM 3172, GMW3191, MGR ES 62.21.001, GS95003, and VW80001 by integrated automotive factories (OEMs).
  • Established project team for automotive electronics by senior engineers.
  • Integrating physical and chemical inspection techniques and equipment; strengthening techniques for preparation, inspection and analysis of sample materials.
  • Established professional FA project team, providing customers with the performance evaluation and analysis after aging test.

Contact us

DEKRA Asia Pacific

400 688 1925
Share page